Where to find fc to st adapter?
When you looking for fc to st adapter, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable fc to st adapter is not an easy task. In this post, we show you how to find the right fc to st adapter along with our top-rated reviews. Please check out our suggestions to find the best fc to st adapter for you.
Best fc to st adapter
1. FC To ST Male to Female Fiber Optical Hybrid MM 62.5/125 simplex adapter
Feature
Insertion Loss:0.30dB max., 0.10dB typeDurability:500 matings, 0.2dB max. increase
Housing Material:Zn-Alloy or Cu-Ni (metal) & Engineering Plastic Blue (plastic)
High repeatability
High environmental stability
Description
Hybrid optical adapters with male to female configuration are very useful in connecting patchcords with different connectors.Because both a connector plug (male) and an adapter socket (female) are provided, this hybrid adapter fits in various circumstances, offering flexibility and reducing the size, weight and complexity of the system.
It has low insertion loss and high return loss.
2. Fiber Optic Adapter FC to ST Simplex Metal
Feature
FC female to ST female Fiber CouplerCan be used with singlemode or multimode cable
Connect two Simplex FC/ST patch cords together
Simplex SIngle Fiber connection
Description
Fiber Optic Adapter FC to ST Simplex Metal3. FC to ST - Extra Durable Armored Fiber Optic Patch Cable - 1M / 3.28ft - Single Mode - SIMPLEX
Feature
COMMERCIAL GRADE CABLES - Our 1 meter / 3.28 feet, FC to ST, Single mode, Simplex Fiber optic patch cables meet all UL, cUL, IEC & RoHS standards. Pacsat patch cables are Ideal for all fiber networks including CATV type FTTH, FTTB & FTTP systems.EXTRA DURABLE - Armored patch cables have a metal sheathing housed in a robust outer jacket. Providing greater protection for sensitive optical fiber than standard cables, it enables installation in hazardous areas including environments with excessive dust, oil, gas, moisture, or even damage-causing rodents.
FIBER TYPE - Mode: 9/125m. Wavelength: 1310/1550nm. Jacket Material: PVC Armored (default)/LSZH/OFNP. Jacket Color: Blue OD: standards 2.0/3.0 (default)/0.9/3.0mm.Simplex optical fiber. Insertion loss typical: SC 0.3dB. Return loss: SC 60dB Interchangeability: 0.2dB. Vibration: 0.2dB. Operating temperature: -40~75 Storage temperature: -45~85
RELIABLY TESTED - Every jumper is optically tested for insertion loss to ensure a high quality end product. We rely on these cables for use in our clients fiber networks across the USA.
TRUSTED SUPPLIER - Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We independently source our own brand high spec suite of fiber optic products for HDTV, SDI, and Analog MATV systems.
Description
This high quality, cost-effective armored 9/125m single-mode simplex fiber-patch cable meets all RoHS compliances. Every jumper is optically tested for insertion loss to ensure their quality. Suitable for all networks including CATV type FTTH, FTTB and FTTP systems.4. ST to FC Single Mode Coupler/Adapter - 5 Pack - Commercial Quality
Feature
COMMERCIAL QUALITY: ST style to FC coupler adaptor for use in single mode applicationsRELIABLY TESTED: Every product is tested after production, and is Rohs compliant. We rely on these couplers for use in our clients fiber networks across the USA.
USEFUL DESIGN: Free-hanging or panel-mount design. Dust caps protect against debris and contamination
DIMENSIONS: 2.5" x 8" x 0.5" (5 pack)
TRUSTED SUPPLIER - Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We independently source our own brand high spec suite of fiber optic products for HDTV, SDI, and Analog MATV systems.
Description
ST to FC single-mode simplex fiber couplers provide a cable to cable or cable to equipment fiber optic connection. We also supply a wide variety of mating sleeves and adapters including special male to female hybrid fiber optic adapters. Product Details ST style to FC style for use in single-mode applications. Dust caps protect against debris and contamination. Free-hanging or panel-mount design. RoHS Compliant. Weight: 4 oz. Dimensions: 2.5" x 8" x 0.5" (5 pack)5. FC to ST Fiber Optic Patch Cable - 1M / 3.28ft - Single Mode - SIMPLEX - Commercial Quality
Feature
COMMERCIAL GRADE CABLES - Our 1 meter / 3.28 feet, FC to ST, Single mode, Simplex Fiber optic patch cables meet all UL, cUL, IEC & RoHS standards. Pacsat patch cables are Ideal for all fiber networks including CATV type FTTH, FTTB & FTTP systems.RELIABLY TESTED - Every jumper is optically tested for insertion loss to ensure a high quality end product. We rely on these cables for use in our clients fiber networks across the USA.
FIBER TYPE - Simplex optical fiber. Insertion loss typical: SC 0.3dB. Return loss: SC 60dB Interchangeability: 0.2dB. Vibration: 0.2dB. Operating temperature: -40~75 Storage temperature: -45~85
PRODUCT DETAILS - Connector: FC to ST. Length: 1M / 3.28ft. Mode: 9/125m. Wavelength: 1310/1550nm. Jacket Material: PVC (default)/LSZH/OFNP. Jacket Color: Yellow. OD: standards 2.0/3.0 (default)/0.9/3.0mm
TRUSTED SUPPLIER - Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We independently source our own brand high spec suite of fiber optic products for HDTV, SDI, and Analog MATV systems.
Description
This high quality, cost-effective 9/125m single-mode simplex fiber-patch cable meets all RoHS compliances. Every jumper is optically tested for insertion loss to ensure their quality. Suitable for all networks including CATV type FTTH, FTTB and FTTP systems. Product Details Connector: FC to ST Fiber Mode: 9/125m Polish: UPC to UPC Wavelength: 1310/1550nm Fiber Type: Simplex Insertion loss: SC 0.3dB Interchangeability: 0.2dB Return loss: SC 60dB Vibration: 0.2dB Operating temperature: -40~75 Storage temperature: -45~85 Jacket Material: PVC (default)/LSZH/OFNP Jacket Color: Yellow Jacket OD: standard 2.0 (default)/0.9/3.0mm Dimensions: 8" x 8" x 0.5" Weight: 6 oz.6. ST to FC Single Mode Fiber Patch Cord (Insensitive) - Duplex - 3M - UPC/UPC - 9/125um OS2 100G - Beyondtech PureOptics Cable Series
Feature
Beyondtech high-quality and Insensitive LSZH ST to FC Fiber Grade: G.657.A2 Patch Cable Single mode 9/125 OS2 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services.This Beyondtech Fiber OS2 9/125 ST/FC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications.
This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm - 0.22 dB/km at 1310 nm
This ST to FC Single mode Duplex OS2 fiber patch cords operate at -40C to +75C and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm.
Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends.
Description
Easy installation
Beyondtech OS2 9/125 ST to FC Fiber Patch cable simplify the installation process and reduce the total cost of ownership of your project, due to pre-terminated fiber intrinsic plug-and-play characteristic.
10 Gigabit Performance
OS2 Singlemode laser optimized fiber patch cords are designed to be used in LAN, WAN and SAN 10GB networks and are able of handling the most challenging telecommunications data transmission requests.
Properly tested
Each Fiber patch cord is individually and rigorously tested and certified to be within accurate optical insertion loss.
Cable Specifications:
Wavelengths: 1310 and 1550
Yellow Jacket
Bend Radius: Insensitive G.657.A2/B2 (7.5mm)
Cable Jacket: 3.0mm LSZH
Operating Temperature: -4 to 158F (-20 to +70 C)
Standard Zip Cord
Core: OS2 Bend Insensitive Fiber - 9/125 Microns
Fiber-Grade:G.657.A2
Polarity: A(Tx) to B(Rx)
Polish: UPC to UPC
OS2 9/125 fiber conforms to ITU-657 A2/B2
Size: 3 Meters (M) - 9.84 Feet (ft)
Multiple Sizes Available: (1m,3m,5m,10m,20m)
ST/FC connector (Fiber Patch Cable)
Beyondtech ST FC Patch Cord feature precision hold, plastic ferrule. They comply with all ANSI/EIA/TIA standards.
FC to ST Singlemode Duplex are used to connect FC / ST devices and are suitable for Gigabit Ethernet, video, multimedia, premise installations, fiber optics patch panels, fiber optic transceiver and fiber optic network, industrial, and military applications. Connectors feature dust caps on the tips for protection.
7. FiberShack - Fiber Optic Adapter & Variable Attenuator Kit. Contains 3 Styles Adapter (ST,SC,FC) & 2 Variable Attenuators (LC & ST). for Single-Mode Multi-Mode Cables
Feature
CONTAINS - 5 ST to SC, 5 ST to FC, 5 SC to FC Adapters along with 1 LC & 1 ST Variable Attenuator / VOA, all in a durable Plano snap case.PROVEN PERFORMANCE - Our Optical Adapter/Attenuator Kits are ideal for Single-mode or Multi-mode applications, adapting most ST/SC/FC fiber optic jumpers. FiberShack's adapters deliver top performance to clients around the world
USEFUL DESIGN - Adapter Kits are economical & convenient, reducing the cost of purchasing separate adapters that are often more expensive. The durable Plano case ensures protection against elements out in the field. Dust caps are included to protect against debris and contamination giving superior performance across your audio, video or digital networks.
QUALITY TESTED - Every Adaptor is QA tested to ensure a consistent end product. Our adaptors are designed with heavy use in mind and all products meet UL, cUL, IEC & RoHS standards
TRUSTED SUPPLIER - Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We always found it difficult to source raw materials for jobs at short notice and at a good price. So we started to source our own fiber products for HDTV, SDI, and Analog MATV systems. This need has created our brand, FiberShack, your mission critical supplier for all Optical Fiber needs.
Description
Ideal for all fiber optic professionals.8. FC to ST Fiber Optic Patch Cable - 10M / 32.8ft - Single Mode - SIMPLEX - Commercial Quality
Feature
COMMERCIAL GRADE CABLES - Our 10 meter / 32.8 feet, FC to ST, Single mode, Simplex Fiber optic patch cables meet all UL, cUL, IEC & RoHS standards. Pacsat patch cables are Ideal for all fiber networks including CATV type FTTH, FTTB & FTTP systems.RELIABLY TESTED - Every jumper is optically tested for insertion loss to ensure a high quality end product. We rely on these cables for use in our clients fiber networks across the USA.
FIBER TYPE - Simplex optical fiber. Insertion loss typical: SC 0.3dB. Return loss: SC 60dB Interchangeability: 0.2dB. Vibration: 0.2dB. Operating temperature: -40~75 Storage temperature: -45~85
PRODUCT DETAILS - Connector: FC to ST. Length: 10M / 32.8ft. Mode: 9/125m. Wavelength: 1310/1550nm. Jacket Material: PVC (default)/LSZH/OFNP. Jacket Color: Yellow. OD: standards 2.0/3.0 (default)/0.9/3.0mm
TRUSTED SUPPLIER - Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We independently source our own brand high spec suite of fiber optic products for HDTV, SDI, and Analog MATV systems.
Description
This high quality, cost-effective 9/125m single-mode simplex fiber-patch cable meets all RoHS compliances. Every jumper is optically tested for insertion loss to ensure their quality. Suitable for all networks including CATV type FTTH, FTTB and FTTP systems. Product Details Connector: FC to ST Fiber Mode: 9/125m Polish: UPC to UPC Wavelength: 1310/1550nm Fiber Type: Simplex Insertion loss: SC 0.3dB Interchangeability: 0.2dB Return loss: SC 60dB Vibration: 0.2dB Operating temperature: -40~75 Storage temperature: -45~85 Jacket Material: PVC (default)/LSZH/OFNP Jacket Color: Yellow Jacket OD: standard 2.0 (default)/0.9/3.0mm Dimensions: 8" x 8" x 0.5" Weight: 6 oz.9. DealMux FC-ST Type Optical Cable Connector Flange Adapter Fiber Coupler 2Pcs
Feature
The Optical Fiber Mating Adapter/Sleeve is used to connect two connectorized fibers together with low loss.This model has an FC fiber connector to ST fiber connector.
It can be used for single-mode or multi-mode connectorized fibers.
Low insertion and back reflection ---High precision alignment,telcordia,TIA/EIA compliance.
A good accessory to link network cable efficiently.
Description
Description:The Optical Fiber Mating Adapter/Sleeve is used to connect two connectorized fibers together with low loss.This model has an FC fiber connector to ST fiber connector.It can be used for single-mode or multi-mode connectorized fibers.Low insertion and back reflection ---High precision alignment,telcordia,TIA/EIA compliance ---Compact design plastic housingSpecification:Product Name : FC-ST Optical Fiber ApdaterType : FC-STEach Size : 24 x 22 x 9.5mm/0.94inch x 0.9inch x 0.37inch(L*W*T)Install Hole Dia : 2mm/ 0.08inchInstall Hole Distance : 18mm/0.7inchMaterial : Metal and PlasticWeight : 15g;Color :Silver Tone,Yellow,RedPackage Content : 2 x FC-ST Optical Fiber Apdater10. Jeirdus 2Meters 6ft FC to ST Duplex 9/125 Single-mode Fiber Optic Cable Jumper Optical Patch Cord FC-ST
Feature
2 Meters,FC/PC-ST/PC,Duplex,SinglemodeCompatible with all standard fibre optic equipment and connectors
Ceramic connectors ensure low signal loss, and high reliability
Description
All our products are 100% new fiber optic cable of carrier-class quality ,and can be fully trusted for your most demanding LAN/WAN applications,voice projects, or network deployments.
Recent Comments