Top 10 recommendation panel glue
When you looking for panel glue, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable panel glue is not an easy task. In this post, we show you how to find the right panel glue along with our top-rated reviews. Please check out our suggestions to find the best panel glue for you.
Best panel glue
1. 3M 08115 Panel Bonding Adhesive - 200 ml
Feature
3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat.It is packaged in a 200 ml cartridge and is to be used in conjunction with our 08117 Premium Manual Applicator and the 08193 Static Mixing Nozzles.
Panel Bonding Adhesive has excellent adhesion to a wide variety of plastic and metal substrates.
When the manufacturer's directions are followed, this product can be used to bond door skins, roof skins, quarter panels and box sides.
In addition, product can be used for bumper cover repair under certain conditions. Typical substrates include cold roll steel, aluminum, SMC, and FRP.
Description
MMM8115 Features: -Two part opexy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). -Primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. -Cures on demand with addition of heat. -Glass beads work as built in spacers for optimum bond line thickness. Product Type: -Adhesives. Dimensions: Overall Height - Top to Bottom: -1.5 Inches. Overall Width - Side to Side: -4.3 Inches. Overall Depth - Front to Back: -6.5 Inches. Overall Product Weight: -0.75 Pounds.2. 3M 08115 Panel Adhesive & 3M 08571 Manual Applicator Gun
Feature
(1) 8571 Applicator Gun Supports 200mL Cartridges(1) 8115 200mL panel bondingadhesive fro aluminum, FRP, SMC, Steel
8115 Adhesive Fully Cures in 24 hours
(2) 08193 Mixing Tips
Product dimensions: 12.2 x 5.8 x 9.3 inches
Description
WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.3. J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Dries Black - 25 ml
Feature
Black drying two-part body panel adhesive and gap filler sets in 15 minutes and cures in 30 minutesGreat for filling gaps, plastic to metal and plastic to plastic bonding
Tensile strength of 3770 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
Description
J-B Weld Black Plastic Bonder SyringePlastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete and more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets black in color and cures to a hard, permanent bond.
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, rust, etc.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in the USA
4. J-B Weld 50133 Tan 1-Pack
Feature
Tan drying two-part urethane adhesive sets in 15 minutes and cures in 30 minutesGreat for filling dents, bumpers, trim, polypropylene and polyethylene plastics, fiberglass and more
Tensile strength of 3770 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
Description
J-B Weld Plastic Bonder SyringePlastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in the USA
5. Plastic Glue - Acrylic Repair, Auto Body Filler and Bumper Repair Kit - Bonding Adhesive for Radiators, Headlights, Most Plastics, Metal, Glass, Fiberglass and More
Feature
GET FASTER AND STRONGER BONDING WITH THIS DUAL ADHESIVE REPAIR KIT AND AS A PLASTIC BODY GAP, CRACK OR HOLE FILLER. It can be used on most plastics (including abs), resin, ceramic, fiberglass, metals, rubber, concrete and glass. Specific items include automotive rubber trim, plastic bumpers, auto emblems, wheel caps, carburetors, headlights, tabs as well as home improvements such as electrical switches, tubs, showers, pool pump valves, household appliances, toys, modeling and much moreFOR BEST RESULTS, USE ON A HORIZONTAL SURFACE. MORE SUPER GLUE THAN MOST OTHER KITS: The kit includes 20ml Adhesive (Special Grade Super Glue) and 15ml each filling powder in black and white which can be mixed to create gray. It can be used either as a two part kit or single acrylic adhesive
STRONG HEAVY DUTY ADHESIVE: It can be sanded, filed, drilled, tapped, painted and is heat resistant up to approximately 194 degrees Fahrenheit (90 Celsius). Great for use on car plastic and for front or rear bumper or fender, dashboard/dash, gas/fuel tank, radiator or headlight repairs or restoration on boats, motorcycles, canoes, dinghy, kayak, ATV's
THE ACRYLIC GLUE PART OF THIS KIT IS SUPER GLUE AND QUITE RUNNY IN ORDER TO SATURATE THE POWDER which means it is easy to apply and a suggestion to keep it FRESH FOR A VERY LONG TIME is to keep it in a refrigerator after opening it.
PROVEN TRACK RECORD: Trusted by thousands of happy customers WORLDWIDE SINCE 1948.
Description
Do you need to fix something? (ANYthing?) Automotive trim and parts, plastic, metals, glass, wood, concrete or rubber? TV remotes, shoes, chairs, tools, kitchen appliances?
AND you need it to dry instantly right? Pratley's Powda Bond is your answer.
Benefits:
Powda Bond is:An instant repair, ultra fast curing adhesive kit and gap filler which can be used either as a two part kit or single adhesive.
The repair kit includes: 20ml Adhesive (Special Grade Super Glue) that can be used on its own or with the filling powder(s) and 15ml each filling powder in black and white which can be mixed to create gray if you need that.
It can be sanded, filed, drilled, tapped and painted
It repairs most plastics, metals, rubbers, wood, concrete and even glass.
It fills cracks, gaps and holes.
It can be used on just about any automotive parts like bumpers, wheel caps and carburetors as well as household items like electrical switches, shoes, remotes, toys, tools, pool pump valves etc.
It can be exposed to water once hardened.
It can withstand heat up to 194 degrees Fahrenheit.
Features:
Powda Bond is manufactured by Pratley. The company was established in 1948 and manufactures over 800 products that is sold worldwide to thousands of very happy customers.Powda Bond is considered an Adhesive and Powder Filler Repair Kit.
The surface will begin to harden in approximately 15 seconds after all the liquid has been absorbed.
The adhesive will harden fully after approximately 30 seconds (it will take a bit longer in cold weather though)
Powda Bond will harden to a depth of about 10mm. If thicker sections are needed, you can apply layers one on top of the other.
Powda Bond is set apart from similar products because its penetration is far superior.
6. Permatex 84145 Permapoxy Black Plastic Weld - 0.84 fl. oz.
Feature
Structural adhesive designed for general purpose bonding of a wide variety of materialsForms a tough, durable bond with a permanent strength up to 3500 PSI
Fast-curing product sets in five minutes at room temperature
Bonds most plastics, composites, ceramics, and wood in any combination
Gap filling to 0.125 inches
Description
Permatex's Permapoxy Black Plastic Weld is a structural adhesive designed for general purpose bonding of a wide variety of materials. Black Plastic Weld forms a tough, durable bond to most plastics, composites, ceramics, and wood in any combination. It is a fast-curing product with gelling of mixed adhesive in 5 to 6 minutes and fixturing in 9 to 10 minutes. Bonds hard and soft plastics to specified surfaces, and requires no primers. Sets in five minutes at room temperature, with a temperature range of -60 degrees Fahrenheit to 250 degrees Fahrenheit (-51C to 121C). Permanent strength up to 3500 PSI, and gap filling to 0.125 inches. This epoxy is water resistant, with good chemical resistance. Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. NOTE: Permatex Black Plastic Weld will not bond polyethylene and polypropylene plastics.7. THE GLUESMITH EXTRA LARGE PLASTIC REPAIR GLUE AND FILLING POWDERS IT'S SUPER GLUE ON STEROIDS! Used For Automotive Parts Radiators and Headlights, For Most Plastics, Metal, Glass, Fiberglass, Rubber
Feature
LONG LASTING NON CLOG CAP,cap is coated so the glue won't clog or stick the cap. Our glue is super liquid very low viscosity, which means it is easy to apply. The Adhesive has a minimum 2 year shelf life at room temperature in a cool dry place or get up to 5 years or more by keeping it refrigerated.THE BEST VALUE , XL SIZE KIT: The kit includes 2 OUNCES (56 grams ) of our 3rd generation instant glue and 2 ounces each filling powder in black and white which can be mixed to create gray.That is 4 times the amount as other kits. It can be used either as a two part kit or as a all purpose "super duper glue" without the powders
GET FASTER AND STRONGER REPAIRS WITH THIS DUAL ADHESIVE REPAIR KIT AND AS A PLASTIC BODY GAP, CRACK OR HOLE FILLER. It can be used on most plastics (including abs), resin, ceramic, fiberglass, metals, rubber, concrete and glass. Specific items include automotive rubber trim, plastic bumpers, auto emblems, wheel caps, carburetors, headlights, tabs as well as home improvements such as electrical switches, tubs, showers, pool pump valves, household appliances, toys and much more
HEAVY DUTY ADHESIVE: It can be sanded, filed, drilled, tapped, painted and is heat resistant up to approximately 280 degrees Fahrenheit . Great for use on car plastic and for front or rear bumper or fender, dashboard/dash, gas/fuel tank, radiator or headlight repairs or restoration on boats, motorcycles, canoes, dinghy, kayak, ATV's
BUY WITH CONFIDENCE: We have been supplying this product for professional use for more than 17 years. We have thousands of satisfied customers.
Description
Do you need to fix something? Anything! Automotive trim and parts, plastic, metals, glass, wood, concrete or rubber? TV remotes, shoes, chairs, tools, kitchen appliances?And you need it to dry instantly? Do not worry! The Gluesmith is here to fix your problem!It's super glue on steroids!!!! Benefits: An instant repair, ultra fast curing adhesive kit and gap filler which can be used either as a two part kit or single adhesive. The repair kit includes: 2 ounces of advanced 3rd generation Super Duper Glue that can be used on its own or with the help of the POLYFILLER filling powder in black or White (can be mixed to create gray if needed) and remember you get 2 ounces of each powder!! It can be sanded, filed, drilled, tapped and painted It repairs most plastics, metals, rubbers, wood, concrete and even glass. It fills cracks, gaps and holes. It can be used on just about any automotive parts like bumpers, wheel caps and carburetors as well as household items like electrical switches, shoes, remotes, toys, tools, pool pump valves etc. It can be exposed to water once hardened. It can withstand heat up to 290 degrees Fahrenheit. Features: The surface will begin to harden in approximately 15 seconds after all the liquid has been absorbed. The adhesive will harden fully after approximately 30 seconds (it will take a bit longer in cold weather though) It will harden to a depth of about 10mm. If thicker sections are needed, you can apply layers one on top of the other.8. 3M 38315 Panel Bonding Adhesive - 47.5 ml
Feature
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass)A high performance two component epoxy adhesive.
Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components.
Also use to reinforce welded or riveted structural components.
Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle. The Net Fill amount is 47.5mL. Cartridge Volume is 50mL
Description
For use on outer body panels only. Not for use on structural components such as pillars, frame rails, core supports, or rocker panels (on unibody vehicles). Cures on demand with addition of heat. Glass beads work as built-in spacers for optimum bond line. A high performance two component epoxy adhesive. Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components. Also use to reinforce welded or riveted structural components. PN38193, 3MTM Scotch-WeldTM EPXTM Plus II Applicator with 2:1 and 1:1 Plunger Model 91709. J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml (Pack of 6)
Feature
Tan drying two-part urethane adhesive sets in 15 minutes and cures in 30 minutesGreat for filling dents, bumpers, trim, polypropylene and polyethylene plastics, fiberglass and more
Tensile strength of 3770 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
Description
J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml (Pack of 6)10. ATG Dashboard Cockpit Instrument Panel Full Repair Kit Restore Car InteriorRestore Holes, Cracks, and Tears
Feature
VERSATILITY: The ATG Smart Repair Dashboard Repair fixes mounting holes made by CB radios, speakers,DURABILITY: The plastic repair material remains flexible and resilient after drying for leather surfaces. A hardening powder is included to harden the putty when being used on harder dash surfaces such as polyurethane, plastic, and vinyl. The surface structure paper will help you match the repairs to the pattern of your dashboard.
Special Features: Fast - Inexpensive - Simple - Durable - Increases value - Can be applied repeatedly - Can be used in all areas
Types of Damage: Cuts - Cracks - Burns - Scrapings - Mounting holes - Other damages
Material Applications: Vinyl - Leather - Leatherette - Hard plastic - Soft plastic - Similar Surfaces
Description
Suitable for surfaces made of soft or hard plastic, leather, synthetic leather and or vinylKit Contents:
1 Mixing tin
1 Powdered hardener
1 Plastic spatula
1 Piece of cotton fabric
1 Heat transfer stamp
1 Plastic mass
1 Tin of special plastic glue
1 Structur paper surfaces set (with different textures)
1 detailed instruction manual (English | German | French | Italian | Spanish)
7 Plastic tins with repair compounds (white, black, blue, red, yellow, green, brown)
Applications:
Cracks
Cuts
Burns
Scrapings
Mounting holes
Other damages
Material:
Vinyl
Leather
Leatherette
Hard plastic
Soft plastic
Special Features:
Fast
Inexpensive
Simple
Durable
Increases added value
Can be applied repeatedly
Can be used in all areas
8 to 10 Repairs (Mounting holes)
Application Areas:
Car - Motorcycle - Truck - Boat - Bus - Campers - Household - Office
Recent Comments