Top 10 jack planes for woodworking
If you looking for jack planes for woodworking then you are right place. We are searching for the best jack planes for woodworking on the market and analyze these products to provide you the best choice.
Best jack planes for woodworking
1. WEN 6550 Benchtop Thickness Planer, 12-1/2"
Feature
Granite table provides a sturdy non-marring surface for wood to smoothly travel overPlane boards up to 6 inches thick and 12.5 inches wide, adjust depth to plane off anywhere from 0 to 3/32 of an inch with each pass
15-amp motor generates 18,800 cuts per minute at a 26 feet per minute feed rate
Fan-assisted dust port removes sawdust from workpiece
The smooth granite table never warps and provides precise support to wood passing through the machine, combine that with the heavy duty cast iron base for a sturdy planer that does not walk or wobble during operation
Description
Remember when you brought those old jagged boards back to life? The WEN 12.5-inch Thickness Planer repurposes rough and worn wood to give it an exceptionally smooth finish. The powerful 12 amp motor provides over 18,000 cuts per minute. Combine that with the 26 feet per minute feed rate for a machine that can easily take on the hardest woods available. Plane boards up to 12.5 inches wide and 6 inches thick with ease. The handy depth adjustment knob varies each pass to take off anywhere from 0 to 3/32 of an inch. The fan-assisted dust port removes chips and sawdust from the work piece and blasts them out of the way. This package also includes a table extension to limit snipe while providing extra support to your work piece during planning. Repurpose old wood or make a set of boards flush with the WEN 12.5-inch Thickness Planer. And because it's a WEN product, the WEN Planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a two-year warranty. Remember when your planer could handle every job you threw at it? Remember WEN.2. WEN 6530 6-Amp Electric Hand Planer, 3-1/4-Inch
Feature
6-amp motor provides up to 34,000 cuts per minute16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches
Make rabbets up to 7/10 inch in size with the included rabbeting guide
Lightweight design weighs in at a mere 6 pounds
Includes power planer, dust bag, a kickstand, a parallel fence bracket and a 2-year warranty
Description
Remember when you needed to smooth out those joists? Plane away chips, splinters and misshapen edges with the WEN 6 Amp 3-1/4 Inch Electric Hand Planer. Perfect for fixing stubborn doors and fitting wood. This power planers 6-Amp motor delivers over 34,000 cuts per minute to your workpiece, slicing away any irregularities until the surface of your boards are aligned and smooth. With a cutting width of 3-1/4 inches and a maximum cutting depth of 1/8 inch, youll have the perfect companion for fitting and squaring boards. The 16 positive stops increase in increments of 1/128 inch anywhere from 0 all the way up to 1/8 inches. The base plate shoe even includes a v-shaped groove for easily flattening sharp post corners. Aside from the power planer, this package also includes a dust bag, a rabbeting guide, a kickstand and a parallel fence bracket. The included rabbeting guide adjusts anywhere from 0 to 7/10 inches to allow for rabbets up to an inch deep in size. The parallel fence provides an accurate and straight cut by making sure your strokes are directly parallel to the edge of the wood (a must have for planing door edges, wood trim and boards). The kickstand protects both the blade and the workpiece in between uses by keeping the blade elevated and out of contact from the surface of your project. Finally, the dust bag collects all of your loose shavings to keep your work space clean and sawdust free. The bag attaches to both the left or right hand side of the planer to fit whatever your preference may be. And because this is a WEN Product, your 6 Amp 3-1/4 Inch Electric Hand Planer comes backed by a 2-year warranty, a friendly customer help line, and a nationwide network of skilled service technicians. Remember when you had a reliable planer that lasted for years? Remember WEN.3. Stanley 12-137 No.62 Low Angle Jack Plane
Feature
Base and frog cast as one for accuracyPatented lateral adjustment locking feature
Cherry wood handle and knob for comfort with solid brass adjustments for smooth operation
Iron casting for weight and durability
Mouth adjustment for different types of wood
Description
Includes No. 62 Low Angle Jack Plane - 12-137. Stanley Hand Tools is a brand of hand tools. It is a division of Stanley Black & Decker, following the 2010 merger of The Stanley Works with Black & Decker4. Stanley 12-404 No. 4 Adjustable Bench Plane with 2-Inch Cutter
Feature
9-3/4-inch adjustable bench plane with a 2-inch cutterHardened, tempered steel gives precision-ground cutter edge durability
Gray, cast-iron base with precision-ground sides and bottom; durable epoxy coating provides long-lasting protection
High-impact polymer handles and knobs are contoured and polished
2-inch cutter; limited lifetime warranty
Description
2510-0603 Features: -Grey cast iron base with sides and bottom machined smooth and true .-Durable epoxy coating for long-lasting protection .-Hardened and tempered tool steel cutter for cutting edge durability .-Cutter is fully adjustable for depth of cut and alignment .-Quick release cam-lock for easy blade removal .-Contoured polymer handles and knobs .-Replacement Blade 12-134-1 (do not stock) .-9-3/4 length .-2 cutter width . Amazon.com The Stanley No. 4 Adjustable Bench Plane with a 2-inch Cutter has a gray, cast-iron base with precision-ground sides and a bottom that's machined to be smooth and true. Created to work efficiently and easily with your bench-top projects, this plane has all the extra features you need to trim and fine-tune your work piece. Versatile, durable, and designed to accomplish tasks efficiently. Works efficiently and easily with your bench-top projects. View larger. The plane features hardened, tempered-steel construction for precision-ground cutter edge durability that lasts long and true, through years of use. The cutter adjusts easily for depth and alignment, so you always have precise control over the piece at hand -- no matter how hard or uneven the material may be. Its quick-release cam lock makes iron removal easy, and the high-impact polymer handles and knobs are contoured and polished to give you a great grip that permits true accuracy and long use without fatigue.5. No. 4 Smoothing Bench Plane with 2-Inch cutter - Fully Adjustable Wood Hand Planer, Includes 2 blades
Feature
No. 4 Smoothing Plane with two blades (one pre-mounted and one spare included)2-inch blade made of hardened, tempered steel offers durability and precision and can be resharpened. Do not test the sharpness of the pre-mounted blade with your finger, use a piece of paper instead.
Solid brass blade attachment nut offers a longer life over the clamp on some competitor models
Solid natural wood handle and knob with high gloss finish showcases attractive and functional design as well as a traditional solid brass cutter-adjustment knob
9.75-inches long and 2-inches wide
Description
This is a No 4 smoothing bench plane. The handle and knob are made of real natural wood (stained, polished, smoothed and finished). The plane is 9.75-inches long and 2-inches wide. The 2-inch blade is made of hardened, tempered steel offering durability and precision. Do not test the sharpness of the pre-mounted blade with your finger, use a piece of paper instead.The wedge control knob is made of solid brass and offers longer life over the clamp that other competitors have. The Plane is lightly covered in packing oil which you can easily wipe down upon arrival. The pre-mounted iron blade is cold stone sharpened and is ready to work with. Both blades can continuously be sharpened and touched up. Store the plane in a non damp place and wrapped in rust resistant paper for best preservation. We recommend that you spend 15+ minutes to set this plane to your specifications.6. GreatNeck C4 Bench-Jack Plane | 9 Inch Plane, 2 Inch Cutter | Flattens or Reduces Wood Thickness | Useful Woodworking Tool | Adjustable to Control the Depth of Cut | Cast Iron Body & Wood Handles
Feature
9" Bench Jack PlaneFor Professional And Heavy-Duty Application
Comes With Adjustable Blades For Fine Or Coarse Work
Machined And Polished Body For Ultra Smooth Finish.
2" Cutter May Be Resharpened.
Description
The GreatNeck 9-Inch Adjustable Block Plane comes with a solid wood handle for great control. The block plane does not require frequent adjustment. It has a 2-Inch steel cutter that may be resharpened. The block plane is machined and has a polished body. Covered by GreatNeck limited lifetime warranty. GreatNeck has been a hand tool manufacturer since 1919. Our tool brands strive to bring value in design and function. We stand behind our brands and offer an industry-leading lifetime tool promise on workmanship and materials.7. Taytools 469607 Jack Smoothing Bench Hand Plane #5, 14-1/4" Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote
Feature
Body and frog made from nearly indestructible ductile cast ironTote and knob are made from premium grade oiled and hand-rubbed Sapele
Iron is 0.120" thick and 2" wide and made from tool steel hardened and tempered to 55-60
Sole precision ground to within the British Standard of 0.003" over the entire length
Overall length 14-1/4" and 2-1/2" wide, overall weight 5.45 pounds
Description
This #5 jack plane is the perfect tool to smooth and flatten areas and will achieve a flat and smooth finish. This jack plane is ideal for the cabinet maker and discerning woodworker. The body and frog are made from tough ductile cast iron. The sole and sides are precision machined to within 0.003" over the entire length of the sole. The knob and tote are carefully shaped, sanded, oiled and hand-rubbed Sapele. The 0.120 inch thick and 2 inch wide tool steel iron is hardened and tempered to 55-60 Rockwell C. This plane has appropriate mass and weighs in at 5.45 pounds. The frog can be adjusted forward and back. The lever cap is made from plated cast iron. Cap iron screws and adjusting wheels are made from polished brass. The yoke is a solid one piece casting. Bed angle is 45 degrees.8. WoodRiver #5 Bench Plane, V3
Feature
Modeled after the Bedrocks, Stanley Tool's very best line2-7-16" W x 13-7/8"L with 2"W blade
WoodRiver planes feature the same heavy castings (5 lbs) and fully machined frogs
Lightly finished Bubinga handles provide comfort and control
Soles and sides are machined flat and square within tightly held tolerances
Description
Introducing the New and Improved Version 3 WoodRiver Bench Planes! Our new Version 3 bench planes are still based on the reliable Bedrock design and feature heavy, stress relieved ductile iron castings, fully machined adjustable frogs and high carbon steel blades but we took the opportunity between manufacturing runs to do a critical review and make a few improvements. Weve changed the shape of the rear tote and increased the diameter of the blade adjustment wheel to make advancing the blade a bit easier. We improved the lateral adjustment lever and added a traditional style bearing for better control of the blade. Weve made numerous changes to the castings that result in better feedback and a solid feel to the user. Working closely with our own manufacturer, weve continued to make improvements in machining, finish and functionality which we feel have yielded hand planes that are meant to be used and offer an extraordinary value. Tools require minimal tune-up prior to use.An all-purpose plane, the No. 5, or jack, plane will perform almost any job you might need done, while providing you with experience and feed back to help you pick your next plane. The 14 length makes the No. 5 useful for stock removal, smoothing, shooting miters, and jointing smaller work.
9. Bench Plane No. 5 - Iron Jack Plane - Fully Adjustable Wood Hand Planer, 14-Inches Long with 2-Inch Cutter, Includes 2 blades
Feature
No. 5 bench plane (aka jack plane) with two blades (one pre-mounted and one spare included)14-inch long, 2-inch wide Iron body with smooth bottom
2-inch High Carbon Steel blade manufactured from selected steel - fully hardened and tempered to take and hold a razor sharp edge even on hardest woods - Do not test the sharpness of the pre-mounted blade with your finger, use a piece of paper instead
Solid brass blade attachment nut offers a longer life over the clamp on some competitor models
Solid wood handle and knob with high gloss finish showcases attractive and functional design as well as a traditional solid brass cutter-adjustment knob
Description
This is a No 5 bench plane. The handle and knob are made of real natural wood (stained, polished, smoothed and finished). The plane is 14-inches long and 2-inches wide. The 2-inch blade is made of hardened, tempered steel offering durability and precision. Do not test the sharpness of the pre-mounted blade with your finger, use a piece of paper instead. The wedge control knob is made of solid brass and offers longer life over the clamp that other competitors have. The Plane is lightly covered in packing oil which you can easily wipe down upon arrival. The pre-mounted iron blade is cold stone sharpened and is ready to work with. Both blades can continuously be sharpened and touched up. Plane should be stored in a non damp place and wrapped in rust resistant paper for best preservation. We recommend that you spend 15+ minutes to set this plane to your specifications.10. WoodRiver #62 Low Angle Jack Plane
Feature
Heavy ductile iron castingHigh-carbon steel blade
Flat Sole and square sides
Bubinga tote and front knob
Recent Comments