The 10 best volt meter bag 2022
Finding the best volt meter bag suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best volt meter bag
1. Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600
Feature
Autoranging clamp multimeter measures AC currents, AC/DC voltage, resistance, and also provides diode and continuity testsThe clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional features include: Data Hold, Max Reading, and an easy-to-read large LCD
Comes with a handy carrying pouch, perfect for use while you're on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-year warranty and lifetime support from Etekcity
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
2. Aenllosi Hard Case for Fits Etekcity MSR-C600/AstroAI/Uni-T UT202A Auto-Ranging Multimeters AC/DC voltmeter Ammeter
Feature
Aenllosi Hard Carrying Case for Uni-T UT202A/Etekcity MSR-C600/AstroAI Auto-Ranging Multimeters AC/DC voltmeter AmmeterFeatures: Case is made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes
With Internal mesh pocket can store other accessories at your convenience
Internal size: 8.5*7*4 inch, external size:9*7.5*4 inch, weight:200g.
For sale is case only, device and accessories are not included.
Description
Aenllosi Hard Carrying Case for Etekcity/AstroAI Digital Clamp Meter Multimeter, MSR-C600 Auto-Ranging Multimeters AC/DC voltmeter Ammeter /Uni-Trend UT202A Auto-ranging AC 600 Amp Clamp Meter.3. Sumnacon Multi Test Leads Kit, 18-in-1 Electrical Multimeter Test Lead With Alligator Clips, Test Probe, Spring Grabber,Test Extension Lead - Professional Volt Meter Leads For Voltage Circuit Tester
Feature
Test Extension Lead - Applied double-insulation and made with flexible silicon leads for a more secure, reliable. Silicone leads makes the leads more flexible and they should stay that way when it's cold, not like PVC leads get very stiff when outside in the winter. CATIII 1000V and 10A connection. 4mm plug with insulated sleeve on the both ends.Test Probe - Designed to improve steadiness in slippery hands. Rubber overmolded surfaces give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.Connectable to CATIII 1000V/CAT IV 600V and 20A(Max.). Come with extra 8pcs interchangeable probe tips(4pcs nickel-plated copper and 4pcs gold-plated copper). And other 2 pcs test probe with fine tips(30V, 3A) allows you to perform even more precise testing for hardware like circuit boards
Spring Test Clips - Clip is made of stainless steel and shrouded insulated and flexible silicone for safety and durability use. Add this to your meter bag, when you need a third hand, or have to test many circuits sequentially,component grabber hook is an absolute necessity. Connectable to CATII 1000V and 4A.
Crocodile Clips - The max wide that alligator clips open is 30mm. Voltage: 1000V;Max. Current:32A.Can be connected to 4mm plugs. It shrouded by ABS+PA insulation shell for safety.The alligator clips are especially handy if you're trying to get readings from somewhere awkward.This isn't anything groundbreaking or something that's going to change your life, but if you have a multimeter, this set will fit great in your tool bag.
OFFER YOU THE EXTRA HANDS - A variety of them so you won't run out of leads to test. With 2 x Test extension line, 2 x test probes, 2 x extra fine tip, 8 x test probes tips, 2 x alligator clips, 2 x spring type clips; After all we wish we have extra hands to do whatever *wink wink* but truth is we only have 1 pair of hands and using these does free up our hands for the more important stuff.
Description
Why You Should Have These TEST LEAD KIT?
Test probes are made of nickel-plated copper, measuring precision, removable cap replacement tips.
Shell ABS material to enhance the insulation effect, more reliable connection to the vast majority of multimeter.
Two Alligator clips connect with 4mm banana plugs, the crocodile clip mouth is shrouded, more safety.
The tips are interchangeable and the kit includes sharp needle point tips
Awesome combination of nice probes, long probes for hard to reach areas, and two sets of alligator clips.
The wires are nice, pliable silicon and the Gator Clips fit snugly onto the end of the test leads via a "bushing" of sorts.
Detailed Information:
Test extension line
CAT 1000V, 10A
Lead Material: ABS+PA, Double insulation
Total length: 41.34 inch/1050mm
Test probe
CATIII 1000V/CAT IV 600V, 20A(Max.)
Pen Tip Material: 4pcs nickel-plated copper and 4pcs gold-plated copper
Test Probe Material: ABS+PA
Test Probe Diameter: 2mm
Spring type clips
CATII 1000V and 4A
Spring Wire Material: stainless steel
Test clip Material: flexible silicon, Good heat resistance
Crocodile clamp
Voltage: 1000V; Max.Current:32A
Max. openning30mm
Serrated materialPure nickel-plated iron
Can be connected to 4mm plugs.
Package:
2* Test extension line
2* Test probe
2* Crocodile Clamp
2* Spring type clips
2* Extra fine tip
8* Test probes tips
4. Tetra-Teknica Essentials Series MCH-01 Double-Layered & Padded Carrying Zipper Case with Wrist Strap for Handheld Multimeter, Color Black
Feature
Padded double-layered zipper carrying bag for pocket-size and medium sized handheld multimetersMain compartment measures approximately 8 in X 5 in X 2.0 in (L X W X H)
Secondary compartment for storing test leads, batteries, therrmo probe & other tools
Polyester construction provides outstanding wear-resistance and moisture-resistance
Velcro straps secures the multimeter in place and inner pocket offers extra storage space
Description
Featuring a double-layer design with zippers, the Tetra-Teknica Essentials series multimeter carrying case MCH-01 is made with durable and premium quality polyester and designed for a wide range of handheld multimeters, testing tools and other accessories, an affordable, easy and convenient tool to keep your valued investment well protected and neatly organized.The MCH-01's main compartment measures approximately 8" X 5" X 2", compatible with a great number of digital multimeters including the ones made by Fluke, Mastech, Uni-T, Tekpower, Sinometer, Digitek and etc, some compatible models include popular Fluke 15B, 16B, 17B, 20, 70, 11X, 170 series, Mastech MS8261, MS8264, MS8268, MS8269, Tekpower TP4000ZC, Uni-T UT61 series and a lot more. There are two Velcro straps that help secure the tool in place. For added convenience, there's also a pocket inside the main compartment, ideal for placing the user manual for quick reference when needed.
The MCH-01's secondary compartment is mainly designed to store accessories for your multimeters such as test leads, thermo probes, spare batteries and other compact tools. The center divider is also padded for enhanced protection.
Friendly reminder from the manufacturer:
This multimeter carrying case is designed for a great number of multimeters and other handheld tools, however it is NOT a universal case. To save your precious time and avoid unnecessary returns, it's strongly recommended to measure the tool prior to purchasing. If your tool's longest side exceeds 8 inches or its second longest side exceeds 5 inches or its shortest side exceeds 2.5 inches, the tool will NOT fit in this case.
Tetra-Teknica is a registered trademark in the United States of America. Any unauthorized use of this trademark is a violation of Federal laws and could be subject to liability for damages and penalties.
5. Hard Storage Tools Case for Etekcity MSR-A600/MSR-R500/AstroAI AM33D Digital Multimeters by Aenllosi
Feature
Aenllosi-Hard EVA Travel Storage Organizer Portable Tools Case Bag for Electronic Amp Volt Ohm Voltage Meter MultimeterFeatures: Case is made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes
With Internal mesh pocket can store other accessories at your convenience
Internal Dimension: 5.9x2.9x1.9 inch, External Dimension: 6.5 x 3.5 x 2.3 inch Weight: 2.9oz
for sale is case only, device and accessories are not included.
Description
Aenllosi-Hard EVA Travel Storage Organizer Case Bag for Electronic Amp Volt Ohm Voltage Meter Multimeter fits Etekcity MSR-R500/ MSR-A600/AstroAI AM33D6. AstroAI Digital Clamp Meter, Multimeter Volt Meter with Auto Ranging; Measures Voltage Tester, AC Current, Resistance, Continuity; Tests Diodes, Red/Black
Feature
Check out our VIDEO on the left side and take a quick tour of AstroAI Clamp MeterTEST A WIDE RANGE of measurements including AC/DC Voltage, AC Current, Resistance, Continuity; Also Tests Diodes
QUALITY DESIGN features a sampling speed of 2 times per second; Auto off conserves battery life and increases the lifespan of your multimeter
CONVENIENT FEATURES included Data Hold / Max Hold and a Large, Digital LCD Display, and Extra Large Clamp make for easy use while on the job; Low Battery indication keeps unwanted surprises at bay so you never accidentally run out of juice
IDEAL FOR SAFETY: Transformer Jaws pick up AC Current flowing through the conductor, increasing safety while improving this mustimeter's capabilities
COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy- duty functions
3 Year Warranty provided by AstroAI
Description
The AstroAI 202D Clamp Meter is designed to be used safely and accurately by anyone. It's design is easy and safe to use with advanced features like Auto-Ranging built right into the meter's design. Run tests on diodes while still being able to measure AC/DC voltage, AC current, resistance, and continuity, all with the same device. This Clamp Meter is designed to be used safely, with it's integrated Clamp for measuring AC Current without having to physically contact the hot part of a wire. Specifications Max. display: 2000 Counts LCD Size: 30*49mm Range Select: Auto Operating Temperature: 32~1040~40,less than 80% Relative Humidity Storage Temperature: 14~122(-10~50),less than 85% Relative Humidity Battery Type: 1.5V x 2 AAA Batteries AC Voltage Test: Yes DC Voltage Test: Yes AC Current Test: Yes Resistance Test: Yes Continuity Test: Yes Diodes Test: Yes Package Contents 1 x AstroAI Digital Clamp Meter 1 x Test Leads (Pair) 2 x AAA batteries 1 x User Manual 1 x Carrying Bag7. Auto Ranging Digital Multimeter and Clamp Meter - with Storage Bag Battery Alligator Clips Test Leads for AC/DC Voltage/Current Voltage Alert Amp Ohm/Volt Multi Tester Diode
Feature
Digital Multimeters:Continuity Test and Voltage Alert: Use the PTC ceramics protection circuit for Resistance and frequency measurement and Shielding Interference and Diode and Continuity Test can be 20000 FDigital Clamp Meter Multimeters:Autoranging clamp multimeter can be used to measure AC and DC Voltage, AC Current, Resistance, Diode test, Data Hold, Max Value Hold. troubleshoot electrical problems safely
voltmeter:Made of high quality ABS, lightweight and portable,durable enough for long term use, Suitable for distribution box, electrical circuit, home users, enthusiasts, professional electricians and technicians
Easy Use and Clear Read: with large Overview Backlit LCD display which is visible in low light,3 times readings per second,3 5/6 Digital LCD Backlight Display for visibility in dimly lit areas
With 10 Auto-Ranging: Accurately measures AC/DC voltage and current, frequency, resistance, diode and continuity NCV test, It's a good 10 Function Digital Multimeter
Description
A truly professional electrical engineer user, no matter when and where are you should prepare a multimeter to solve all the electrical problems. Thsinde digital multimeter and digital clamp meter is designed more safe and more accurate for everyone, whether you are an engineer, an electronics enthusiast, a DIY man at home,The Digital multimeter will supply you an simple and fast result, but it also seems not simple for engineers and professionals alike. the advanced features such as Intelligence IC chips, true RMS, and AUTO-Ranging for diodes and transistors Test, while still measuring voltage, current, capacitance, frequency, resistance, continuity, etc., and the test value of this digital multimeter is more accurate than all of them on the market,with this multiemter can solve the automotive, household appliances, Circuit and all other issues.The two can be used together for more flexible work.8. Proster Auto-Ranging Digital Multimeter 6000 Counts and 2000uF Digital Multimeters Meter Amp Ohm Volt Meter Multi Tester with Capacitance Test and Temperature Measurement
Feature
6000 5/6 Digital MultimeterLCD Display with 5999 and 2000uF, relative value measuring, maximal/minimal value measuring, auto/manual range.Extensive MultimeterWith this autoranging multimeter, it not only measures AC/DC Voltage and Current, Resistance, Frequency, Duty Cycle but also Temperature, Analog Bar.
Safety SecurityLow Battery Voltage Indication, Overload Protection on all ranges, Data Hold Function, all these special features provides you secure and convenient testing.
Protective Rubber Sleeve & StandProvide protection against knocks and bumps; Built-in support stand for hand free use; Test Probes Slot to place and keep the test probes.
Test Leads & Multimeter Carry BagIncludes two AAA battery , a pair of test leads & K-type temperature probe, a Carry Bag for portable multimeters carry and keep.
Description
Proster VC99 3 5/6 digital multimeter holds functions of measuring DCV, ACV, DCA, ACA, resistance, capacitance, frequency, temperature, duty cycle, transistor, diode, and continuity, etc.It also can provide special functions including analog bar, unit symbol display, data holding, relative value measuring, maximal/minimal value measuring, auto/manual range switching (RANGE), auto power off and warning alarm.
Specification:
DCV: Range: 600mV/6V/60V/600V Accuracy:(0.5%+3) /1000V Accuracy: (0.8%+3)
ACV: Range: 6V/60V/600V/ Accuracy: (0.8%+5) /750V Accuracy: (1.0%+5)
DCA: Range: 600uA/6000uA/60mA/600mA Accuracy:(1.0%+3) /6A/20A Accuracy: (2.0%+5)
ACA: Range: 600uA/6000uA/60mA/600mA Accuracy:(1.2%+5) /6A/20A Basic accuracy: (2.0%+10)
Resistance: 600 Accuracy:(8%+5) /6k/60k/600k/6M Accuracy:(0.8%+3) /60M Basic accuracy: (1.2%+5)
Capacitance: 40nF Accuracy:(3.5%+10)/400nF/4uF/40uF Accuracy:(2.5+5)/400uF/2000uF Accuracy: (5.0%+8)
Frequency: 100Hz/1kHz/10kHz/100kHz/1MkHz/60MHz Basic accuracy: (0.5%+4)
Continuity test: Approx less than 30 10
Low battery indication: Approx less than 2.4V
Auto power off: Approx 15minutes
Diode test: Yes
hFE test: Yes
Duty cycle measuring: Yes
Data hold: Yes
Analog bar: Yes
Function protect: Yes
Input impendence: 10Mohm
Sampling rate: approx 3 times/s
AC frequency response: 40-400Hz
Operation way: Manual or auto range
Max. display: 6000
LCD size: 65x41mm2
Battery: 3V AAAx2
Power dissipation: Quiescent current approx. 2mA Package Content:
1X Proster VC99 Digital Multimeter
2X Digital Multimeter Probe
1X Temperature Probe
2X AAA battery (in the Multimeter)
1X Carry Bag Note: The fuse is 12A, if you need to test 20A, you need to change the fuse. Warranty:This Proster VC99 Digital Multimeter Provides 18 Months Warranty.
9. Triplett 3022 (Model 310-C) Hand-Sized Analog Voltmeter with Polarity Reversing Switch, 18 Ranges and Functions
Feature
18 rangesAC/DC Voltage to 1200V, DC current to 0.6A
Resistance to 20 ohms
Overload protection and shock resistant case
Description
The Triplett 3022 (Model 310-C) Analog Voltmeter tests 18 Ranges and Functions. AC/DC voltage to 600V, DC current to 0.6A, and resistance to 20 milliohm. Decibel function for audio work. Polarity Reversing Switch. Greater Sensitivity on AC Volts. It's drop resistant with a high-rmpact case. Diode Overload Protected Meter. Fused Resistance Ranges. Single Enclosed Range Switch. 3 Year Warranty. Founded in 1904, U.S.-based Triplett Test Equipment continues to be on the leading edge of specialized testers. Whether supplying vital test equipment to the U.S. Signal Corps during WWII, or providing the railroad industry with essential testers to ensure the safety of their crews and the public, Triplett prides itself in developing innovative, reliable, and durable test equipment for every technician--that also won't break the bank.10. Portable Digital Multimeter Tester - 9999 Counts Multi Testers - AC/DC Voltmeter Ammeter Current (mA&A) Ohmmeter Ampere Test Meters
Feature
True RMS, 9999 countsStreamlined design with comfortable handle.Clear ReadingLarge LCD display makes the reading very clear.
Auto Power OffAuto power off when there is no measurement.
Multi-Test FunctionsMeasure for the AC/DC Voltage; AC/DC Current (mA&A)ResistanceContinuityDiodeCapacitanceFrequency and Duty Cycle
Package Included1 * Digital Multimeter; 1 * Carrying Bag, 1*User Manual.
Description
Product Description:-Measure AC/DC Voltage
- Measure AC/DC Current (mA&A)
- Measure Resistance
- Measure Continuity
- Measure Diode
- Measure Capacitance
- Measure Frequency and Duty Cycle
- Square Wave Output
- Auto Power Off
Warning when using
1.Do NOT exceed the "maximum value" indicated in the Specification;
2.Do NOT input voltage at the Current Mode, the Resistance Mode, the Diode Mode, the Continuity Mode, or the Temperature Mode;
3.Do NOT use the product when the batteries or the battery cover is not placed properly;
Turn off the product and remove the test leads from the test points before changing batteries or fuses.
Package:
1 * Digital Multimeter
1 * User Manual
1 * Carrying Bag
Recent Comments