Related posts

Feature

Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
Wireless control, easy to install. The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding.
Wireless RF signal can pass through walls, floors, doors or windows. You can use two or more units in the same place.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Reliable control: The receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously.

Description

Package Include:
1* Receiver (with cover)
1* Remote Control (with battery, If you need extra remote control , please tell us. )

Product Description
1. Working Voltage: DC12V-DC48V
(DC 12V 14V 15V 16V 17V 18V 19V 20V 21V 22V 23V 24V 36V 48V All is ok)
2. Quiescent current:About 10ma
3. Working Temperature:-40'C- +80'C
4. Receiving Sensitivity :more than -108dBm
5.Working Frequency:315MHz/433MHz Optional by leaving us massage
6. Output 0V Switching Value use relay COM NO
7.Max Load Current:40A Relay have better Load less than 30A
8.Size:72mm*52mm*26mm

Output State:
it can be adjusted by the Jumper on the receiver

Momentary---------Jumper on 1 PIN
Toggle-------------Jumper on "T&G"
Latched------------Jumper on "L&G"

Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF,
Latched------------Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF.

Learning Method
Input 12-48V for the Receiver .Press the Learning Button until the Led indicator OFF. Then press transmitter, the Led indicator flash 3 times, it mean learning successfully.

Clearing Code
Keeping press the Learning Button on the receiver until the LED indicator OFF to ON , it mean the code have been cleared successfully.