Related posts

Feature

PACKAGE INCLUDE- 1x 7 Fins Bottom Assembly Blade, 3 x Replacement Gasket Rubber(one on the blade,the other 2 is Spare Rubber).
APPLY TO- 7 fins Nutri Ninja Auto iQ # BL480, BL482-30, BL492, BL492W, BL481, BL486CO, BL640, BL642, BL642W, BL642Z, BL682, BL2013, BL480D, BL487, BL487A, BL488W, BL490, BL491, BL641, BL680A, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing)
BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS2) The blade has MALE FINS 3) 4" (10cm) Diameter.
MATERIAL- Made of food grade BPA Free Plastic and stainless steel, perfect fit to blender's motor base.
Note- Please take off the pre-installed gasket in the bottom blade before using the replacement gasket. Besides, be careful of the sharp blade when open your package.

Description

ONLY COMPATABLE WITH 7 fins model Auto iQ BL480, BL482-30, BL492, BL492W, BL481, BL486CO, BL640, BL642, BL642W, BL642Z, BL682, BL2013, BL480D, BL487, BL487A, BL488W, BL490, BL491, BL641, BL680A, NN100, NN100A, NN101, NN102, BL2012
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70, BL580, BL660 (1100 watt), BL663 (1100 watt), BL740, BL770 BL771 BL772 (1500 watt), BL780 (1200 watt), BL810 BL820 BL830. Please check your model carefully before purchasing.

TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it's loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage
4. Do not overfill! To avoid spilling, do not add ingredients past the "Max" fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

Package
1* blender parts- blade for Ninja
3 * Gasket replacement for Ninja (one on the blade,the other 2 is Spare Rubber).