Related posts

Feature

Black drying two-part body panel adhesive and gap filler sets in 15 minutes and cures in 30 minutes
Great for filling gaps, plastic to metal and plastic to plastic bonding
Tensile strength of 3770 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA

Description

J-B Weld Black Plastic Bonder Syringe

Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete and more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets black in color and cures to a hard, permanent bond.

Use on:
  • Automotive
  • Ceramic
  • Concrete
  • Epoxy and Adhesives
  • Fiberglass
  • Plastic/Composite/PVC
  • And more

    • Instructions

    1. Prepare: Clean surface area of dirt, grease, oil, paint, rust, etc.
    2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
    3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
    4. Dry: Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40 degrees Fahrenheit, then set time is longer.

    J-B Weld is proudly made in the USA