Related posts

Feature

Easy to use, can automatically detect the battery, automatic identification mode, the line clamp positive and negative products bright red light hint, all functions fail, protect the use of safety, but also detect sensitive reaction, 100mS reaction speed.
Battery clamp with low pressure (long-voltage) protection function, so that the product can be protected under low pressure condition, will not cause product damage.
When the car battery is completely dead (disassembled), press and hold the Force output button for 3 seconds to force the car to start.
Product design Two-color led, when the product connection function normally open, will be bright green light, other anomalies will be bright red, indicating error.
Normal ignition starts the car (supports one-click Start) starts successfully in 30 seconds to remove the start power.

Description

The first step is "connect to start Power"
Check the emergency start power, do plug into the emergency power do interface.

Precautions: Please shut down the car navigation, air conditioning and other high-power equipment, and then clean the car supply connector rust, dust booty do not reverse, make sure the clip and the car power link tightly.

The second step is "Battery clamp connection Battery", red clip link car power positive, black clip link car power negative.

The third step, "Start the car", the normal ignition start the car (support one-click Start) Start a successful 30 seconds to remove the starting power to start the power supply, first unplug do Plug and then remove the battery clip from the car battery.