Looking for a rode procaster? Have a look at this 2022 guide!
When you want to find rode procaster, you may need to consider between many choices. Finding the best rode procaster is not an easy task. In this post, we create a very short list about top 10 the best rode procaster for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 rode procaster:
Best rode procaster
1. Rode Procaster Broadcast Dynamic Vocal Microphone
Feature
Amazon as the seller is the ONLY authorized Fulfilled By Amazon DealerPurchases from unauthorized dealers carry No Warranty
Broadcast quality sound; Internal pop-filter to reduce plosives
High output dynamic capsule; Internal shock mounting for low handling noise
Balanced, low impedance output
Note: The shock mount, or microphone holder, that comes with the microphone is not supposed to stand. It is intended to attach to a microphone stand.
Description
Designed as a no-compromise microphone for On-Air broadcast use, the Rode Procaster Broadcast Dynamic Vocal Microphone is one of the ultimate broadcast quality mics for the 21st century. Featuring a tight polar pattern and tailored-for-voice frequency response, the Procaster is perfect for every application where a great sounding, rugged microphone with superior ambient noise rejection is demanded. Plus, the Procaster is affordable and features an internal pop-filter to reduce plosives. Includes stand mount, 3/8 inch adaptor and zip pouch. Rode Procaster Features Broadcast quality sound High output dynamic capsule Balanced, low impedance output Internal shock mounting of capsule for low handling noise Internal pop-filter to reduce plosives Robust, all metal construction Designed and manufactured in Australia Ten year warranty Includes RM2 stand mount 3/8 inch adaptor ZP1 zip pouch2. Ultimate Broadcast Bundle: Rode Procaster Large Capsule Broadcast Quality Dynamic Microphone with Rode PSA 1 Swivel Mount Studio Microphone Boom Arm and Rode PSM 1 Shockmount; For Broadcasting
Feature
Dynamic Broadcast MicrophoneStudio Boom Arm
Elastic Suspension Mount
Includes: Rode PSM1 Shock Mount for Rode Podcaster Microphone
Rode PSA1 Studio Boom Arm for Broadcast Microphones
Description
The Procaster Broadcast Quality Dynamic Microphone from Rode is designed for capturing speech in broadcast radio, voice-over recording, podcasts, and similar applications. It features a tight cardioid polar pattern and tailored frequency response that result in optimum speech reproduction without off-axis noise. The all metal contruction, internal pop-filter, and internal shockmount further minimize handling noise and contribute to the microphone's durability. The package includes a microphone stand mount and a zip pouch, Rode PSM1 Shock Mount and Rode PSA1 Studio Boom Arm3. Rode Procaster Booming Kit: Procaster, PSA1, PSM1, and 10' XLR cable
Feature
Kit includes Procaster, PSA1 Boom Arm, PSM1 Shockmount, and a 10' XLR cableRode Procaster is a quality solution for broadcast radio, voice-over recording, podcasts, and more
Rode PSA1 mounts to most desks and tables
Procaster uses standard 3-pin XLR (10' cable included)
Description
The RDE Procaster is a professional broadcast quality dynamic microphone, specifically designed to offer no-compromise performance for voice applications in the broadcast environment. Featuring a tight polar pattern and tailored-for-voice frequency response, the Procaster is perfect for every application where a great sounding, robust microphone with superior ambient noise rejection is demanded.The Procaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. Its high output dynamic capsule and balanced low impedance output make it an ideal broadcast and voice over microphone.
The Procaster includes a sturdy RM2 microphone ring mount.
The PSA1 offers a horizontal reach of 820mm, a vertical reach of 840mm and full 360 degree rotation. It is supplied with velcro cable wraps and both desk-clamp and desk-insert style attachments for versatile mounting in desks up to 55mm thick (clamp) or 70mm (insert).
The perfect suspension shock mount for the Procaster or Podcaster, the PSM1 provides isolation from external vibrations which can translate as low frequency noise or manipulate the microphone position. The PSM1 gives you confidence when using your microphone in environments where there is any movement that may interfere with the microphones performance.
4. Rode PSM 1 Shockmount For Podcaster
Feature
Amazon as the seller is the ONLY authorized Fulfilled By Amazon DealerPurchases from unauthorized dealers carry No Warranty
Rotates 360 degrees with a maximum reach of 820mm (32.5 inches) horizontally and 840mm (33 inches) vertically
3/8 inch thread adaptor
Holds up to 2Kg (4.4lbs)
Does not need any nut/ washer or bolt. The open end of the shock mount is to be directly screwed onto the mic stand
Description
Shockmount for RODE Podcaster and Procaster Microphones5. Rode WS2 Microphone Pop Filter/Wind Shield for NT1-A, NT2-A, NT1000, NT2000, NTK, K2 and Broadcaster Microphones
Feature
Amazon as the seller is the ONLY authorized Fulfilled By Amazon DealerPurchases from unauthorized dealers carry No Warranty
Compatible with K2, NTK, NT2000, NT2-A, NT1000, NT1-A, NT1-A Matched Pair, Podcaster, Procaster, & Broadcaster microphones
Provides additional protection for the microphone capsule against any wind noise or plosives
Weight: 10g; Dimensions: 110mmh x 85mmw x 85mmd
Warranty: 1 year
Description
The WS2 windshield provides additional protection for the microphone capsule against any wind noise or plosives.6. Rode Procaster Quality Dynamic Mikrofon + Rde elastische Mikrofonhalterung PSM1 Bundle
Feature
Broadcast quality soundHigh output dynamic capsule
Balanced, low impedance output
Internal shock mounting of capsule for low handling noise
Rotates 360 degrees with a maximum reach of 820mm (32.5 inches) horizontally and 840mm (33 inches) vertically
3/8 inch thread adaptor
Holds up to 2Kg (4.4lbs)
Includes two desk mounting options
7. Shure SM7B Vocal Dynamic Microphone for Broadcast, Podcast & Recording, XLR Studio Mic for Music & Speech, Wide-Range Frequency, Warm & Smooth Sound, Rugged Construction, Detachable Windscreen - Black
Feature
Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speechBass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting
Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors
Internal "air suspension" shock isolation virtually eliminates mechanical noise transmission
Highly effective pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration
Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals
Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone position
Classic cardioid polar pattern, uniform with frequency and symmetrical about axis, to provide maximum rejection and minimum coloration of off-axis sound
Rugged construction and excellent cartridge protection for outstanding reliability
Replacement cartridge: RPM106
Description
The SM7B dynamic microphone has a smooth, flat, wide-range frequency response appropriate for music and speech in all professional audio applications. It features excellent shielding against electromagnetic hum generated by computer monitors, neon lights, and other electrical devices. The SM7B has been updated from earlier models with an improved bracket design that offers greater stability. In addition to its standard windscreen, it also includes the A7WS windscreen for close-talk applications. Popular radio and TV mic features excellent shielding against electromagnetic hum. Plus mounting bracket.8. Rode NT-USB Versatile Studio-Quality USB Cardioid Condenser Microphone,Black
Feature
Amazon as the seller is the ONLY authorized Fulfilled By Amazon DealerPurchases from unauthorized dealers carry No Warranty
High quality studio microphone with the convenience of USB connectivity
Ultra-low noise. Compatible with Apple iPad
On-mic mix control
Includes Tripod stand, pop shield and ring mount
Description
The NT-USB is a highly versatile side-address microphone that is ideal for recording singing and musical performances in addition to spoken applications such as podcasting and voice-over. It is fully compatible with all mainstream recording applications on both Windows and Mac OS based computers, as well as the Apple iPad using RDE Rec, Garage Band, or any other recording app that accepts an external microphone. Use on the Apple iPad requires a suitable USB connection adaptor, such as the Apple Camera Connection Kit. The body of the NT-USB features a zero-latency stereo headphone monitoring (3.5mm) jack, which allows you to monitor the microphone input in realtime, along with dials to adjust the monitoring level and mix between the computer/iPad audio and the microphone input. A premium pop-filter is included, which fits onto the base of the mic, positioning the filter the ideal distance from the capsule to minimize plosives (hard 'B', 'T' or 'P' sounds that produce a harsh sound) during singing or speech. Also provided is a high-quality stand mount with industry standard 3/8" thread, desktop tripod stand that allows the NT-USB to sit at a comfortable height on a tabletop, and a pouch for storage of the microphone when not in use. compatible with both Windows and Mac computers, as well as the Apple iPad via the USB camera connection kit (available directly from Apple)9. Rode NT1-A Anniversary Vocal Cardioid Condenser Microphone Package
Feature
Amazon as the seller is the ONLY authorized Fulfilled By Amazon DealerPurchases from unauthorized dealers carry No Warranty
Large 1 inch capsule with gold plated diaphragm
Cardioid polar pattern; Wide dynamic range
Ultra low noise, self noise of only 5dB (A)
Includes RDE SM6 shock mount, pop filter and dust cover
Description
The RODE NT1A raises the bar for value-priced mics! The NT1A Anniversary Model is a complete redesign of the now legendary NT1 classic studio microphone. From the new nickel plated body to the state of the art surface mount electronic circuitry, the NT1A will leave you asking 'how can RODE offer a microphone that sounds this good, for so little money'? The RDE NT1A, Winner of the Electronic Musician 2004 Editor's Choice Award and the world's quietest studio condenser microphone. This redesigned version of RDE's classic NT1 has only 5 dBA of self-noise.10. Rode PSA1
Feature
Amazon as the seller is the ONLY authorized Fulfilled By Amazon DealerPurchases from unauthorized dealers carry No Warranty
Rotates 360 degrees with a maximum reach of 32.5 inches horizontally and 33 inches vertically
3/8-inch threaded mic mount/clip only. If your mic mount thread is 5/8", you will need a mic thread adapter (adapters not included)
Designed for the RDE Procaster and Podcaster, the PSA1 supports most microphones weighing between 700g (1.5lb) and 1.1kg (2.4lb) when combined with shock mount
2-axis swivel mount for accurate positioning
Recent Comments