10 best heat shrink tubing clear 1 inch for 2022
It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 heat shrink tubing clear 1 inch. Its followed by an in-depth review of each heat shrink tubing clear 1 inch. Hopefully, once you are done reading this article, you will be well informed about heat shrink tubing clear 1 inch and be able to select the right heat shrink tubing clear 1 inch for you without any hesitations.
Best heat shrink tubing clear 1 inch
1. 270pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing Kit, 5 Sizes (Diameter): 3/8, 1/4, 3/16, 1/8, 3/32 inch, Marine Wire Cable Sleeve Tube Assortment with Storage Case for DIY by MILAPEAK (Black & Red)
Feature
Versatile & DIY Helper- Multiple sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212(Fahrenheit), then glue inside will soften and seal the connection.Safe & ECO-Friendly- Our heat shrink tubes are both UL & CSA certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, Formaldehyde (HCHO) Free, protect you and your famaily from toxins.
Customized Protector- Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you and your kids DIY.
Fast & Easy Use- Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating for large one. Also Includes handy plastic container for easy organization and storage.
What You Get- Total 270pcs heat shrink tubes, 5 Sizes, DIA: 3/8"(8pcs), 1/4"(12pcs), 3/16"(20pcs), 1/8"(80pcs), 3/32"(150pcs), Comes with storage box, Our 1 Year Free Warranty and Full Refund within 30 Days ensure pleasant shopping experience.
Description
MILAPEAK 3:1 Dual Wall Adhesive lined Heat Shrink Tubing kit
- Best for solder joint protection, group of lines marking, resistance electric capacity reason protection etc.
- High Quality
- Waterproof
- Long service life
- High Strength Toughness
- Corrosion resistance
- Good electrical insulation
- High temperature resistance
How to use it?
1. At First choose the right size tubes, as it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original diameter, please measure diameter of wire which is equal to the size of tube after shrinked.
2. Wrap the cable wire with the tube, then use a lighter heating if the tube is small or hair dryer, heat guns heating for large one until the wire was wrapped tightly.
3. Don't touch the tube until it becomes cool.
Specification:
- Color: Black & Red
- Material: Polyolefin
- Heat shrink ratio: 3:1
- Operating Temperature:-55C to + 125C
- Minimum Shrinkage Temp: 70C
- Full Shrinkage Temp: 110C maximum
- Tensile strength: 10.4Mpa
- Dielectric strength: 15 kV / mm
- Flammability: Flame Retardant
Warranty
- 1 Year Free Warranty
- 30 Days return
Package Contents
- 1x 270Pcs(5 Sizes) Dual-Wall 3:1 Adhesive Lined Heat Shrink Tubing
* 70pcs 1.77" lengths ?3/32"(Black 35pcs,Red 35pcs)
* 80pcs 1.77" lengths ?3/32"(Black 40pcs,Red 40pcs)
* 80pcs 1.77" lengths ?1/8"(Black 40pcs,Red 40pcs)
* 20pcs 3.5" lengths ?3/16"(Black 10pcs,Red 10pcs)
* 12pcs 3.5" lengths ?1/4"(Black 6pcs,Red 6pcs)
* 8pcs 3.5" lengths ?3/8"(Black 4pcs,Red 4pcs)
- 1x Plastic Box
2. HUAHA 16 Ft 2:1 Heat Shrink Tubing Wire Wrap Cable Sleeves(Diameter 0.75", Clear)
Feature
Material: Polyethylene Terephthalate,Good FlexibilityOperating temperature: -103 F to 257 F | Melt temperature: 446 F
Versatile: Great for automotive, computer and electronic applications,cut to length (Hot knife recommended)
Shrinking Ratio: 2:1
RoHS Approve
Description
The HUAHA 2:1 Heat Shrink Tubing,great to protect wiring safely. Fast, safe, secure way to wrap wiring harnesses. Protects and insulates. Great variety of top pro quality heat shrink tubing. Will shrink up to half of original diameter. 3 different diameter with 2 colors.3. 560PCS Heat Shrink Tubing 2:1, Eventronic Electrical Wire Cable Wrap Assortment Electric Insulation Heat Shrink Tube Kit with Box(5 colors/12 Sizes)
Feature
Material:Made of Polyolefin, Shrinkage Ratio:2:1 (will shrink to 1/2 its supplied diameter)Suitable for electrical insulation, wire bundling, colour coding, mechanical protection, wire/cable joints and daily repairs etc
Comes with 560pcs heat shrink tube assorted in plastic box, 5 colors( Yellow, Blue, Black, Green, Red), 12 Specifications , satisfied for your different need
Length: 45mm, Internal Diameter:1mm/1.5mm/2mm/2.5mm/3mm/3.5mm/4mm/5mm/6mm/7mm/10mm/13mmShrinking ratio: 2:1
Package Included: 1 x 560PCS(12 sizes) 2:1 Heat Shrink Tubing
Description
***For best results, please use a hot air gun until it reduces in size.PACKAGE:
(Quantity x Internal Diameter x Single Length)
90pcs x 1.0mm x 45mm Black
70pcs x 1.5mm x 45mm Red
80pcs x 2.0mm x 45mm Yellow
70pcs x 2.5mm x 45mm Green
50pcs x 3.0mm x 45mm Black
45pcs x 3.5mm x 45mm Blue
45pcs x 4.0mm x 45mm Red
20pcs x 5.0mm x 45mm Blue
20pcs x 6.0mm x 45mm Blue
25pcs x 7.0mm x 45mm Red
25pcs x 10.0mm x 45mm Black
20pcs x 13.0mm x 45mm Black
NOTE:
Minimum Shrinkage Temp: +70
Full Shrinkage Temp: +110 maximum
Operating Temperature: -55 to + 125
Tensile strength:10.4Mpa
Dielectric strength: 15 kV / mm
Flammability: Flame Retardant
Cutting method: Scissors or sharp knife
4. Electriduct 1" Heat Shrink Tubing 3:1 Ratio Shrinkable Tube Cable Sleeve - 10 Feet (Clear)
Feature
1" Diameter | 10 Feet | Color: Clear3 to 1 Shrink Ratio - Shrinks to a third of its size
RoHS Compliant | UL Listed | Halogen-Free | 600V
Heat Shrink is measured round before shrinking, not flat | Heat gun required
Color between different sizes may not match | Lengths 50 ft or longer may have splices
5. uxcell Polyolefin 2:1 Halogen-Free Heat Shrink Tubing, 2 M, 6.5ft, Flat Width 42mm, Clear
Feature
Product Name : Heat Shrinkable Tube;Material : Polyolefin;Rated Voltage : 600VTemperature Level : 125C;Flammability : VW-1
Flat Width 42mmDiameter : 25mm / 0.984"(Before Shrinking)12.5mm/ 0.492"(After Shrinking);Shrink Ratio : 2:1
Length (Approx.) : 2M / 6.5Ft;Flat width: 42mm/1.65"(Before Shrinking);Color : Clear
Weight : 70g;Package Content : 1 x Heat Shrinkable Tube
6. 10 FT 1" 25mm Polyolefin Clear Heat Shrink Tubing 2:1 Ratio
Feature
Shrink Ratio: 2:1 (Shrinks to 1/2 of its original diameter)Highly Flame Retardant - UL224 125C - Voltage Rating: 600V
UL Listed & CSA Certified - RoHS Compliant
Operating Temperature: -55C to +135C(-67 To 275 F) - Maximum Continuous Use Temperature: 135C(275 F)
Applications: Electrical Insulation, Strain Relief, Cable Bonding, Color-Coding, Wire Marking, Corrosion Protection, Solder Insulation, Wire Bundling & more.
7. XHF 1 inch (25mm) 3:1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage, 4 Ft Clear
Feature
[Safety and environmental protection] XHF dual wall shrink tube are UL and CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment.[A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on.
[The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.
[Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to the original 1/3.
[Multiple Size Colors] We have three different colors: black, red and clear. There are 7 sizes: 12.7mm (13mm), 15mm, 19.1mm (19mm), 25.4mm, (25mm), 30mm, 39mm (40mm), 50mm.
8. XHF 160 PCS 3/32" 1/8" 3/16" 1/4" 5/16" 3/8" Clear 3:1 Waterproof Automotive Electrical Heat Shrink Tubing Assortmen Kit Marine Grade Adhesive Lined Tube, Insulation Sealing Oil-Proof Wear-Resistant
9. Heat Shrink Tubes, Dual Wall Heat Shrink Tubing 3:1 Ratio Heat Activated Adhesive Glue Lined Marine Shrink Tube Cable Sleeving Wrap Protector Transparent 4Ft (1 (25.4mm))
Feature
FEATURE: Dual-wall, adhesive lined, waterproof, excellent flame retardant and insulation performance, soft, stable performance, Long Lasting Insulation Protection, low temperature shrinkage, shrinking fastSAFE and ECO-FRIENDLY: Our Heat Shrink Tubes are with standard of RoHS, UL and CSA certified Environmental Protection Material Material composition does not contain PBB, PBBO, PBBE, heavy metal and other environmentally hazardous substances which ensures its safe and reliable
GREAT PROTECTOR: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which have better performance when you and your kids DIY
TIDY AND USEFUL: Our heat shrink tubing can offer you a tidy condition. It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating for large one.
100% SATISFACTION GUARANTEE: If you have any unsatisfactory, please just contact our kindly customer service. Our Top Priority is your satisfaction, and always stand behind our products 100%.Choose Purple-fox risk free today.Click the Orange Button to Buy Now!
10. Heat Shrink Tubing, 2:1 Dia 2" Sleeving Wrap Cable Wire Electric Insulation Heat Shrinkable Tube Transparent 16Ft (Dia 50mm)
Feature
Product Name: Heat Shrinkable Tube; Color : Clear; Material: Polyolefin; Flammability: VW-1; Shrink Ratio : 2:1; Rated voltage: 600V; Beginning shrinking temperature: 80C; Completely shrinking temperature: 120C; Length (Approx.) : 4.8M/16Ft;Round Diameter: 50mm / 2" (Before Shrinking), 25mm / 1" (After Shrinking)
Suitable for various electric insulation and bonding of cables and connectors and widely applied for connecting or end-handling, electric wire, insulating and harness of electric wire, corrosion-proof of metallic rods or tubes, and antenna protection.
Our Heat Shrink Tubes are with standard of RoHS, UL and CSA certified; You can use hot air gun,lighter or air dryerto heat the Heat Shrink Tube
Warranty & Friendly Customer Service - We have a commitment to every buyer 100% satisfaction. After all, we are customers, too, so if you have any problem about our products, just contact us anytime you feel convenient.
Recent Comments