Top 10 machinists clamps for 2022
Shopping for the best machinists clamps is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy machinists clamps. Don’t worry any more! We spend many hours to review and compare machinists clamps to make the short list for you. Let’s check which product is suitable with you.
Best machinists clamps
1. TE-CO 20402 Machinist Clamp Kit, 5/8" Table T-Slot x 1/2-13" Stud, 52 Pieces
Feature
Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holderFor workholding during machining applications
5/8" machine tool table T-slot to fit 5/8" T-slot nuts
Bridgeport type milling machines use Part No. 20402
Made from case hardened 1018 steel with a black-oxide finish
2. TE-CO 20402PL Machinist Promo Kit, 5/8" Table T-Slot x 1/2-13" Stud, 52 Pieces
Feature
Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holderFor workholding during machining applications
5/8" machine tool table T-slot to fit 5/8" T-slot nuts
Bridgeport type milling machines use Part No. 20402
Made from case hardened 1018 steel with a black-oxide finish
3. Anytime Tools 8 pc V-Block & Clamp Double Sided 90 Machinist Tool
Feature
Kit Includes 2 pairs 1-1/4" x 1-1/4" x 1-5/8" & 1-1/2" x 1-1/2" x 2"V-Blocks made of chrome steel and hardened to Rockwell 60C and ground.
All sides are ground square and parallel to each other.
V-Block sets include clamps
4. Grizzly T10079 Machinist/Toolmakers Paralle Length Clamps, 1 Pair
Feature
Jaw measures 3/8" wideMaximum jaw opening is 1-1/2"
Approximate weight: 0.4 lbs
5. 4" (100 mm) TOOLMAKER PARALLEL CLAMPS- VICE CRAFT DIY TOOLS
Feature
Manufactured from quality tool steel.Threaded Screw Handles Which Turn Cleanly And Provide Superior Grip
Jaw Width 4" (100 mm)
6. 4 Piece Set Taytools 772195 2 Inch Parallel Toolmakers Machinist Clamps, Overall Jaw Length 2 Inches, Usable Jaw Depth 1-3/4 Inches, Usable Jaw Opening 1-1/2 Inches
Feature
Toolmakers clamps are used by machinists and are designed to hold work together during drilling, tapping and other machining operations.They are different from regular woodworking parallel clamps in that they are made from metal, and are smaller, stronger and used for precision clamping.
They are also known as parallel clamps due to the parallel jaws.
Jaws and screws are hardened steel and come equipped with spring tension clips.
Dimensions: Overall Jaw Length 2 Inches, Usable Jaw Depth 3/4 Inch, Maximal Jaw Opening 1-3/4 Inches
7. Set of 4 Each Taytools 772256 3 Inch Parallel Toolmakers Machinist Clamps, Overall Jaw Length 3 Inches, Usable Jaw Depth 1-3/8 Inch, Usable Jaw Opening 2-1/2 Inches
Feature
Toolmakers clamps are used by machinists and are designed to hold work together during drilling, tapping and other machining operations.They are different from regular woodworking parallel clamps in that they are made from metal, and are smaller, stronger and used for precision clamping.
They are also known as parallel clamps due to the parallel jaws.
Jaws and screws are hardened steel and come equipped with spring tension clips.
Dimensions: Overall Jaw Length 3 Inches, Usable Jaw Depth 1-3/8 Inch, Usable Jaw Opening 2-1/2 Inches
8. Taytools 465982 8 Inch Parallel Toolmakers Machinist Clamp, Overall Jaw Length 8 Inches, Usable Jaw Depth 3-3/4 Inches, Usable Jaw Opening 6 Inches
Feature
Toolmakers clamps are used by machinists and are designed to hold work together during drilling, tapping and other machining operations.They are different from regular woodworking parallel clamps in that they are made from metal, and are smaller, stronger and used for precision clamping.
They are also known as parallel clamps due to the parallel jaws.
Jaws and screws are hardened steel and come equipped with spring tension clips.
Dimensions: Overall Jaw Length 8 Inches, Usable Jaw Depth 3-3/4 Inches, Usable Jaw Opening 6 Inches
9. Set of 4 Each Taytools 772300 6 Inch Parallel Toolmakers Machinist Clamps, Overall Jaw Length 6 Inches, Usable Jaw Depth 3 Inch, Usable Jaw Opening 5 Inches
Feature
Toolmakers clamps are used by machinists and are designed to hold work together during drilling, tapping and other machining operations.They are different from regular woodworking parallel clamps in that they are made from metal, and are smaller, stronger and used for precision clamping.
They are also known as parallel clamps due to the parallel jaws.
Jaws and screws are hardened steel and come equipped with spring tension clips.
Dimensions: Overall Jaw Length 6 Inches, Usable Jaw Depth 3 Inch, Usable Jaw Opening 5 Inches
10. 58 Pc Pro-Series 1/2 T-Slot Clamping Kit Mill Machinist Set 3/8-16
Feature
Our part # ALL-48005Made of high quality casting steel for long life and increased durability. All parts heat treated.
1/2" T-Slot, 3/8-16 stud size, & 1" step block width (all standard)
Contains (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long
Recent Comments