10 best vise stop
Finding your suitable vise stop is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best vise stop including detail information and customer reviews. Let’s find out which is your favorite one.
Best vise stop
1. MILLING VISE WORK STOP QUICK CLAMP CLAMPING JAW KIT
Description
Material:steel
Width:
25MM
Minimum Clamping:
15MM
Maximum Clamping:
26MM
Key Features:
Precision Vise stop
Black oxide treated steel to resist rusting.
Hardened Guide pins.
2. Vise stop 5 Axis movement mill work stop part locator 1/2"-12 table bolt
Feature
CNC precision milling vise part stopHigh precision table mounted part locator stop
Description
5 Axis precision milling vise part stopanodized red and gold (see all pictures for details)
High precision table mounted part locator stop.
Main body is solid one piece, NOT two halves bolted together.
Mounting bolt size is 1/2"-12 thread.
T-nut measures .610 and base width 1.00" (will fit 5/8 t-slot) Heat treated 22mm diameter pivot pins.
These will fit Haas and many other machines.
Could be made to fit bridgeport machines using 3/8" studs,
but will require your bolt, washer and t-nut.
Upper clamp is made of 3 parts, these can be easily taken
apart and cleaned when chips get wedged in.
Locating stop rod is 6mm.1018CR mild steel and can be shaped to your needs.
Upper clamping section uses a 1/2"-12 bolt, same as lower.
Use your 3/8" hex wrench to tighten upper and lower. ( allen wrench or other brands)
No upper handle to get in the way of cutters or coming loose from chips grabbing.
Base, dog leg and three upper clamp parts are made of 6061 aluminum.
Heat treated steel pivots and t-nut.
See pics for all details.
See my reviews and be confindent when you buy.
This is a extreme quality heavy duty part stop.
If you're looking for the best this is a new product.
Any question message me.
Thank you !
3. Edge Technology Vise Jaw Stop
Description
Edge 95-03 Ford 7.3L 6 Position Blank Revolver Performance Chip4. HHIP 3900-2131 Steel Quick Clamp Vise Work Stop
Feature
Fits mill vises with 1/2-3/4" jawsVery handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws
Steel body 1" wide x .38" height
Description
Quick Clamp Vise Work Stop. Fits mill vises with 1/2-3/4" vise jaws. Steel body 1" wide x 0.38" height. Very handy for small parts that do not require the full length. Clamps quickly & easily to the top of existing hard jaws or soft jaws.5. HHIP 3900-2123 Steel Mill Vise Stop for 5" and 6" Vises
Feature
Fits 5 & 6" milling machine visesWill work in left or right hand location
Fits the most popular machine vises
Bolt-on design, requires no modification to vise
Description
Fits 5 & 6" milling machine vises. Fits the most popular machine vises. Bolt-on design, requires no modification to vise. Will work in left or right hand location.6. Edge Technology Pro Vise Stop Single Side 6"
Feature
Low profile design stays below the top surface of vise jaws for cutter clearance.Versatile design allows the 1/4" hardened stop rod to be quickly and accurately positioned.
Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy.
Lever arm can be rotated out of the way for cutter clearance and accurately relocated for repeat setup. (loosening and retightening of screw is required)
Two sets of mounting holes for added versatility.
Description
The Pro Stop by Edge Technology is designed with the CNC machinist in mind. Its super low profile design stays completely below the top surface of the vise which means it will not interfere with cutting tool paths. It will also keep the stop rod square to the workpiece throughout the entire range of motion. This configuration provides a more consistent locating surface for increased part accuracy. After locating the workpiece the arm of the Pro Vise Stop can be rotated out of the way for total cutter clearance. The arm can then be accurately repositioned for repeat setup. A stop rod collar is also included to allow longer than usual stock lengths to be located. Protected by one or more US patents. Low profile design stays below the top surface of vise jaws for cutter clearance. Versatile design allows the 1/4" hardened stop rod to be quickly and accurately positioned. Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy. Lever arm can be rotated out of the way for cutter clearance and accurately relocated for repeat setup. (loosening and retightening of screw is required) Two sets of mounting holes for added versatility. Mounting hardware included. Locate long stock with the included stop rod collar. Versions available for 4", 5", and 6" standard style vises. Large 1/2"-13" bolt used to rigidly attach lever arm. Non-marring 1/4"-20 nylon tip set screw used to secure stop rod mount without damage to lever arm. Non-marring 1/4"-20 flat point set screw used to secure stop rod without damage. Body made from red anodized 6061-T6 aluminum.7. HHIP 3900-2120 Aluminum Vise Work Stop, 7/8" Capacity
Feature
To fit AngLock type milling visesEasily mounts to the top of most vise jaws
7/8" capacity
Single thumb screw tightens clamp to vise jaw
Two ground pins on both sides of clamp
Description
Vise Work Stop 7/8 Capacity. To fit angle lock type vises. Single thumb screw tightens clamp to vise jaw. Two ground pins on both sides of clamp. Easily mounts to the top of most vise jaws. 7/8" capacity.8. Stop-Loc Lathe Stop & Milling Vise Tool, Width: 3/4"
Feature
Gage lengths up to 5-1/2" longFor CNC or manual lathes
Change dull drills (up to 3/4" diameter) in your turret
Description
Stop-Loc Lathe Stop & Milling Vise Tool, Width: 3/4"9. Edge Technology Pro Vise Stop Double Side 6"
Feature
Allows two workpieces to be located for increased productivity.Low profile design stays below the top surface of vise jaws for cutter clearance.
Versatile design allows the 1/4" hardened stop rod to be quickly and accurately positioned.
Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy.
Lever arm can be rotated out of the way for cutter clearance and accurately relocated for repeat setup. (loosening and retightening of screw is required).
Description
The Pro Stop by Edge Technology allows two workpieces to be located for increased productivity. Its super low profile design stays completely below the top surface of the vise which means it will not interfere with cutting tool paths. It will also keep the stop rod square to the workpiece throughout the entire range of motion. This configuration provides a more consistent locating surface for increased part accuracy. Protected by one or more US patents. Allows two workpieces to be located for increased productivity. Low profile design stays below the top surface of vise jaws for cutter clearance. Versatile design allows the 1/4" hardened stop rod to be quickly and accurately positioned. Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy. Lever arm can be rotated out of the way for cutter clearance and accurately relocated for repeat setup. (loosening and retightening of screw is required). Mounting hardware included. Locate long stock with the included stop rod collar. Versions available for 4", 5", and 6" standard style vises. Large 1/2"-13 bolt used to rigidly attach lever arm. Non-marring 1/4"-20 nylon tip set screw used to secure stop rod mount without damage to lever arm. Non-marring 1/4"-20 flat point set screw used to secure stop rod without damage. Body made from red anodized 6061-T6 aluminum.10. Edge Technology Pro Mill Stop
Feature
Versatile design allows the 1/4" hardened stop rod to be quickly and accurately positioned.Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy.
Lever arm can be rotated out of the way for cutter clearance and accurately relocated for repeat setup. (loosening and retightening of screw is required)
Base of unit is keyed to T-slot in table.
Large 1/2"-13 bolt used to rigidly attach lever arm to base. T-nut included.
Recent Comments